Superplasticizer Polycarboxylates High Performance Water-Reducing Admixture Liquid 40% 50%

Model NO.: ELt-PCE
Product Name: Concrete Cement Polycarboxylate Superplasticizer
Cement Paste Fluidity (mm): >=240
Water Reduction (%): >=25
Corrosion to Steel Bars: None
Trademark: elite-indus
Transport Package: 230kg/200L PE Drum, 1100kg/IBC Tank,
Specification: ISO
Origin: China
HS Code: 3824401000
Model NO.: ELt-PCE
Product Name: Concrete Cement Polycarboxylate Superplasticizer
Cement Paste Fluidity (mm): >=240
Water Reduction (%): >=25
Corrosion to Steel Bars: None
Trademark: elite-indus
Transport Package: 230kg/200L PE Drum, 1100kg/IBC Tank,
Specification: ISO
Origin: China
HS Code: 3824401000
        Superplasticizer Polycarboxylates High Performance Water-Reducing Admixture Liquid 40% 50% Solid

1.Introduction
Elt WR is a environmental polycarboxylate superplasticizer. It is a concentrated product. Due to high water reducing rate and low alkali content, it can be widely used in all kinds of high-performance concrete such as retarding concrete,precast concrete,cast -in-place concrete,high performance concrete,flow state concrete,self-compacting concrete and mass concrete. It is widely used in project such as high-speed railway,large bridge,hydroelectric project,nuclear power plant,metro,high way,harbor.

2.Principle of function
Molecular main chain of polycarboxylate high performance water reducer is firmly adsorbed on surface of cement granule where can efficiently counteract hydration reaction and increase its plasticity.

Branched chain surround cement granule having sterically hindered and electrostatic exclusion function which is different from conventional imparts excellent dispersing ability and effect of water reducing which make integrative characteristics of concrete improve greatly.


3.Technical specification

Items
Unit Specification
Visual Appearance / Colorless or yellowish liquid
Density g/cm3 1.10±0.05
PH Acidity % 6.5±1.0
Solid Content % 40.0±1.0 , 50.0±1.5
Cl- % ≤0.2
Na2SO4 % ≤0.5
Cement Paste Fluidity mm ≥230
Physical & Mechanical properties
Test Items Corporation Specification Test Result
Water Reduction Rate% ≥25 36
Bleeding Ratio% ≤60 0
Air Content% ≤6 3.5
Slump Retention(60min)mm ≤80 40
Compressive Strength Ratio% 1d ≥170 220
3d ≥160 210
7d ≥150 195
28d ≥140 180
Shrinkage% 28d ≤110
Steel reinforcement corrosion no no

4.Production Characteristic
A.  High water reduction: The water reduction rate of concrete is above 40%.
B.  Easying to control production: Controling water reduction ratio, plasticity and air entraining
   by adjusting molecular weight of main chain, length and density of side chain, type of side
   chain group.
C.  Good dispersion: High fluidity of concrete results in deposing and compacting easily for
   self-compacting concrete.
D.  High strength gained rate: Greatly increasing early and after strength, reducing energy loss.
   Reduction of cracking, shrinkage and creep.


E.  Wide adaptability: It is compatible with ordinary silicate cement, silicate cement, slag silicate
   cement and all kinds of blendings having excellent dispersibility and plasticity.
F.  Good strength and durability: low lacuna rate, low alkali and chlorin-ion content. Enhancing
   concrete strength and durability.
G.  Environmental friendly products: No pollution during production.
H.  Low-consume, Low-cost: It can be produced in little cycle and little-consume. So it having
low-cost. Especially it can be used in commercial concrete.

5.Scope of application
A..Elt-WR is a superplasticizer used in premix of construction and cast-in-place concrete.
B. It is especially suitable high strength concrete for railway, haven, traffic, bridge and electric
  power and so on.
C.It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber
  and self-leveling concrete


6.Package & Storage
1. Liquid product: 230kg/200L PE drum ,1100kg/IBC tank,.
2. Sealed stored under 0-35ºC,far away from sunlight.
3. Shelflife is normally 12 month. It is tested eligibility and then used when it exceeds.

7.Handling Notes
1. Elt-WR is free from alkaline. It is no toxic, hazardous, and corrosive. It is inedible.
2. When it contacts to eyes and skin, the affected  area shall be immediately rinsed with plenty of water for minutes. Consult a physician if irritation persists.
3. Keep container closed when it is not in use. Do not store the product directly under sunlight.
          Superplasticizer Polycarboxylates High Performance Water-Reducing Admixture Liquid 40% 50% Solid

1.Introduction
Elt WR is a environmental polycarboxylate superplasticizer. It is a concentrated product. Due to high water reducing rate and low alkali content, it can be widely used in all kinds of high-performance concrete such as retarding concrete,precast concrete,cast -in-place concrete,high performance concrete,flow state concrete,self-compacting concrete and mass concrete. It is widely used in project such as high-speed railway,large bridge,hydroelectric project,nuclear power plant,metro,high way,harbor.

2.Principle of function
Molecular main chain of polycarboxylate high performance water reducer is firmly adsorbed on surface of cement granule where can efficiently counteract hydration reaction and increase its plasticity.

Branched chain surround cement granule having sterically hindered and electrostatic exclusion function which is different from conventional imparts excellent dispersing ability and effect of water reducing which make integrative characteristics of concrete improve greatly.


3.Technical specification

Items
Unit Specification
Visual Appearance / Colorless or yellowish liquid
Density g/cm3 1.10±0.05
PH Acidity % 6.5±1.0
Solid Content % 40.0±1.0 , 50.0±1.5
Cl- % ≤0.2
Na2SO4 % ≤0.5
Cement Paste Fluidity mm ≥230
Physical & Mechanical properties
Test Items Corporation Specification Test Result
Water Reduction Rate% ≥25 36
Bleeding Ratio% ≤60 0
Air Content% ≤6 3.5
Slump Retention(60min)mm ≤80 40
Compressive Strength Ratio% 1d ≥170 220
3d ≥160 210
7d ≥150 195
28d ≥140 180
Shrinkage% 28d ≤110
Steel reinforcement corrosion no no

4.Production Characteristic
A.  High water reduction: The water reduction rate of concrete is above 40%.
B.  Easying to control production: Controling water reduction ratio, plasticity and air entraining
   by adjusting molecular weight of main chain, length and density of side chain, type of side
   chain group.
C.  Good dispersion: High fluidity of concrete results in deposing and compacting easily for
   self-compacting concrete.
D.  High strength gained rate: Greatly increasing early and after strength, reducing energy loss.
   Reduction of cracking, shrinkage and creep.


E.  Wide adaptability: It is compatible with ordinary silicate cement, silicate cement, slag silicate
   cement and all kinds of blendings having excellent dispersibility and plasticity.
F.  Good strength and durability: low lacuna rate, low alkali and chlorin-ion content. Enhancing
   concrete strength and durability.
G.  Environmental friendly products: No pollution during production.
H.  Low-consume, Low-cost: It can be produced in little cycle and little-consume. So it having
low-cost. Especially it can be used in commercial concrete.

5.Scope of application
A..Elt-WR is a superplasticizer used in premix of construction and cast-in-place concrete.
B. It is especially suitable high strength concrete for railway, haven, traffic, bridge and electric
  power and so on.
C.It is suitable for the preparation of high strength, high durability, self-compacting, steel fiber
  and self-leveling concrete


6.Package & Storage
1. Liquid product: 230kg/200L PE drum ,1100kg/IBC tank,.
2. Sealed stored under 0-35ºC,far away from sunlight.
3. Shelflife is normally 12 month. It is tested eligibility and then used when it exceeds.

7.Handling Notes
1. Elt-WR is free from alkaline. It is no toxic, hazardous, and corrosive. It is inedible.
2. When it contacts to eyes and skin, the affected  area shall be immediately rinsed with plenty of water for minutes. Consult a physician if irritation persists.
3. Keep container closed when it is not in use. Do not store the product directly under sunlight.
 

3020 SMD IR LED

3020 SMD IR LED supplier from China.


If you want some IR SMD LED, you must consider the 3020 IR LED, which is very common type of IR LED.

Same as the 3014 IR LED, the 3020 IR LED is popular because of the small size.

At the same power, the emission intensity of 850nm infrared will be a bit higher than the 940nm infrared. Astigmatism infrared is the biggest advantage of the SMD infrared, it is exquisite and strength, which is make it become a better choice for the Infrared induction, sweeper, launch and receive.

We produce and sell 3020 SMD IR LED, which is with the wavelength from 680nm-1550nm. In this category, we mainly introduce the two kinds of wavelengths: 3020 LED 940nm IR LED and 3020 LED 850nm IR LED. These two wavelengths are the most commonly used wavelengths in infrared monitoring. They all can be used to monitor products.


3020 IR LED

Then what is the difference between 940nm LED and 850nm LED ?
940nm infrared LEDs are totally invisible to the naked eye, which means you can't see whether the 940nm working or not. Unless you watch it through some device(like phone's camera), which will show some purple or white color light.
The 850nm infrared LEDs have a very slight reddish when it's working, which means you can see if the 850nm LED is working.
Under the same power, radiation intensity of 850nm will be higher than the 940nm. Of course, 940nm also has its own unique advantages. It is the naked eye that is indistinguishable from work or from work, therefore, its application has been widely used in many special markets in the modern era.
We supply the 3020 940nm SMD IR LED and 3020 850nm SMD IR LED products with difference power, such as: 0.1W 940nm, 0.2w 940nm, 0.3w 940nm, 0.4w 940nm, 0.1W 850nm, 0.2w 850nm, 0.3w 850nm, 0.4w 850nm and so on.

3020 SMD IR LED,Super Bright LED 3020,Wavelength IR LED 3020,850Nm 3020 IR SMD LED

Shenzhen Best LED Opto-electronic Co.,Ltd , https://www.bestsmd.com