How to maintain heavy shelves?

Guangdong Deyouxin Warehouse Shelf Factory teaches you how to maintain heavy shelf maintenance and extend your life! Guangdong Deyouxin Warehouse Shelf Factory teaches you how to properly maintain and repair heavy-duty shelf products!
With the rapid development of the modern logistics industry, the utilization rate of logistics auxiliary equipment storage shelves, which is the most basic of logistics operations, is also getting higher and higher. The storage shelves are usually made of metal, have a certain load-bearing strength, and accept the pressure of the goods. Many time points do not need to pay attention to the appearance of shelf goods like other commodities, but the stability of shelves, technical doubts, and the use time of warehouse shelves have gradually become the most important questions for consumers who purchase storage shelves. We all know that any product has its own application period. If this limit is exceeded, it will continue to be used, which will lead to a variety of questions, which may even endanger personal safety.

There are many factors affecting the service life of storage shelves, such as: temperature, humidity, lighting, ventilation conditions of the warehouse, etc. If the humidity of the warehouse is too large, the shelf will be rusted, the load on the shelf will be reduced, and the service life will be reduced. So what should we do to adjust the application period of the extended storage shelves?

1, punctuality to change the maintenance paint, cut rust, do a normal view, is there a local loose fixed screws, timely ventilation, adhere to the warehouse can not be excessively humid.

2, to avoid excessive sun exposure, reasonable ventilation of the shelves, to avoid wet goods placed on the shelves, should be drained and dehumidified as much as possible.
3, according to different shelves, channel width and transport things with a set of anti-collision columns. Install a crash barrier at the channel location.
4. The weight of the goods placed on the shelves must be within the weight of the shelves. The warehouse clerk is best to carry the load-bearing and limited-load logo on the shelf. To comply with the light weight of the bottom of the shelf, that is, the bottom of the weight, the high-level light.
5. Specify the guidelines for the use of shelves. Different warehouses, different goods, and shelves in each warehouse have different methods. Warehouse managers must develop guidelines for the use of shelves, so that each shelf operator can learn and comply, which is the way to reach the guidelines.
6, heavy-duty and high-rise shelf warehouse must be equipped with a power pusher, push the use of the car and operate ligaohuojia.com necessary to be operated by a licensed person. The deformation of most of the warehouse racks is caused by the use of push-up vehicles by non-designated personnel.

To find out more about how the types of shelves are maintained and how to repair them, feel free to contact us! 13925348275 Mr. Zheng
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

General Purpose Powder-Actuated System is used for building fastening, which have three parts: Actuated tools, Cartridges and fasteners. When Actuated tool strikes cartridge and cartridge will explode in the inner of tools and produce a lot of high temperature and high pressure gas. The gas will push the piston and the piston will push the fasteners into the basement. Or the gas will push the fasteners directly into the basement. Like this, we can fix a lot of things into concrete and steel basement tightly. 

The fundamental is as the following:

General Purpose Powder-Actuated Systems

The Actuated tools are classified for direct tools and undirect tools, we can also called high velocity and Low velocity tool, the fundamental is as the following:

High velocity tool:

 Powder-Actuated Systems

Low velocity tool:

Powder-Actuated Systems

Based on different purpose, Cartridges are classified for different calibers and dimensions. The usual caliber and dimension is as the following:

.27calX11mm(S1)

.22calx15mm(S5)

.22calx16mm(S52)

.27calx18mm(S3)

.25calX16mm(S43)

At the same time, each caliber cartridge is classified for different specification based on the quantity of inner powder, which is marked by different color. when the color is more darker, the power level is stronger. otherwise, the power lever is lighter.

cartridge

The fasteners are classified for different categories. Each different category is classified for different specification based on different length and diameter. At the same time, it is  can also be re-designed based on special use.

fasteners


The packages are as the following:

1. Tools: one tool/ plastic box/carton or five boxes/carton

2.Cartridge: 100pcs/paper or plastic box, 100boxes/carton.

3. Fasteners: 100pcs/paper box, XX boxes/carton.

For shipment, all cartons will packed by pallet.


General Purpose Powder-Actuated Systems

General Purpose Powder-Actuated Systems,Powder-Actuated Systems,Powder Actuated Fasteners,Powder Actu

YIBIN CITY NANXI DISTRICT QIANGXIN PLASTIC CO.,LTD. , https://www.homsetfastening.com